Wood preservative with fungicidal and insecticidal action (cyanosis, mold, wood-eating insects, woodworm, termites, etc.). It is used for the restoration, maintenance and protection of affected wood as well as the preventive protection and maintenance of new or intact wood (wooden structures and timber frames).
- Ready to use
- Dose: 5m2/ℓ on intact wood, 3m2/ℓ on affected wood
- Drying time: Sticks after 3 hours, can be painted after 24 hours
- Application with brush, roller or spray gun
Application Method
The product is ready to use and should not be diluted or mixed or used in combination with other maintenance products.
Before applying the product, the wood surface must be clean, dry and uniform, after dirt, moss, mold and loose wood particles have been removed from it and it has been sanded with sandpaper or chemical preparations from old paint and varnish coatings. The contents of the container should be shaken well before use, and the container should be closed tightly after applying the product. The product should be applied with a brush, roller or spray in 2 to 3 coats and its application should not be done at a temperature below 5°C and a relative humidity higher than 80%. After the first coat, the wood can be recoated with a second coat after 1 hour, and the last coat can be applied after 4 hours at a constant humidity of 60%.
Ventilation: Make sure the area is adequately ventilated. If working indoors, prefer water-soluble products.
Κατάλογος προϊόντων
