Satin impregnation varnish for all types of wood with fungicidal protection

Surface preparation:
Dirt, mold and loose particles must be removed. Very resinous woods must first be cleaned with nitro solvent. Previously varnished surfaces must be removed until the wood is in its original form. The surface must be dry, clean and solid. Acceptable wood moisture levels: For softwood 15% - hardwood 12%.
Application:
Ready to use, do not dilute. Mix well before use. Apply 2-3 coats by brush, spray or dip. Do not use at temperatures below 5°C and/or relative humidity above 80%. For best results apply BONDEX Matt as a first coat. For better UV protection, do not apply the clear Satin (900) alone, unless you first use one of the available tints.